Tổng hợp sách kỹ thuật bảo trì cho dân cơ khí

Maintenance Fundamentals

1/ Impact of Maintenance

2/ Fundamental Requirements of Effective Preventive Maintenance

3/ Designing a Preventive Maintenance Program

4/ Planning and Scheduling

5/ Scheduled Preventive Maintenance

6/ Maintenance Ebgineering Roles and Responsibilities

7/ Shaft Alignment

8/ Rotor Balancing

9/ Bearings

10/ Couplings

11/ Gears and Gearboxes

12/ Compressors

13/ Control Valves

14/ Conveyors

15/ Fans, Blowers, and Fluidizers

16/ Dust Collectors

17/ Pumps

18/ Steam Traps

19/ Performance Measurement and Management

http://www.mediafire.com/?hn3fyc3mu29

Pass: vinamain.com

Machinery Component Maintenance and Repair

Part 1: Background to Process Machinery Maintenances Programming

Part 2: Alignment and Balacing

Part 3: Maintenance and Repair of Machinery Components

http://www.mediafire.com/?f22jsawy9f5

Pass: vinamain.com

Industrial Machinery Repair

1/ Introduction: Why Use Best Maintenance Repair Practices ?

2/ Fundamental Requirements of Effective Preventive/Predictive Maintenance

3/ Maintenance Skills Assessment

4/ Safety First, Safety Always

5/ Rotor Balancing

6/ Bearings

7/ Chain Drives

8/ Compressors

9/ Control Valves

10/ Conveyors

11/ Couplings

12/ Dust Collectors

13/ Fans, Blowers, and Fluidizers

14/ Gears and Gearboxes

15/ Hydraulics

16/ Lubrication

17/ Machinery Installation

18/ Mixers and Agitators

19/ Packing and Seals

20/ Precision Measurement

21/ Pumps

22/ Steam Traps

23/ V-Belt Drives

24/ Maintenance Welding

http://www.mediafire.com/?cx3d8wjw6gi

Pass: vinamain.com

Friction, Wear, Lubrication

1/ The State of Knowledge in Tribology

2/ Strength and Deformation Properties of Solids

3/ Adhesion and Cohesion Properties of Solids: Adsorption to Solids

4/ Solid Surfaces

5/ Contact of Nonconforming Surfaces and Temperature Rise on Sliding Surfaces

6/ Friction

7/ Lubrication by Inert Fluids, Greases and Solids

8/ Wear

9/ Lubricated Sliding-Chemical and Physical Effects

10/ Equations for Friction and Wear

11/ Designing for Wear Life and Frictional Performance: Wear Testing, Friction Testing and Simulation

12/ Diagnosing Tribological Problems

http://www.mediafire.com/?86dk8uos15h

Handbook of Shaft Alignment

1/ Introduction to Shaft Alignment

2/ Detecting Misalignment on Rotating Machinery

3/ Foundations, Baseplates, Installation and Piping Strain

4/ Flexible and Rigid Couplings

5/ Preliminary Alignment Checks

6/ Shaft Alignment Measuring Tools

7/ Correcting Misalignment

8/ Alignment Modeling Basics

9/ Defining Misalignment: Alignment and Coupling Tolerances

10/ Reverse Indicator Method

11/ Face and Rim Methods

12/ Double Radial Method

13/ Shaft to Coupling Spool Method

14/ Face-Face Method

15/ Electronic and Electro-Optical Shaft Alignment Systems

16/ Measuring and Compensating for Off-Line to Running Machinery Movement

17/ Aligning Multiple-Element Drive Systems

18/ Aligning V-Belt Drives

19/ Bore Alignment

20/ Parallel Alignment

21/ Alignment Considerations for Specifics Types of Machinery

22/ The History of Machinery Alignment

http://www.mediafire.com/?v62nu03vkes

pass: vinamain.com

Handbook of Lubrication

1/ Friction, Wear and Lubrication Theory

2/ Lubricants and Their Application

3/ Design Principles

http://www.mediafire.com/?5svy2oks8d2

Pass: vinamain.com

Hydrodynamic Lubrication

1/ Friction, Wear, and Lubrication

2/ Foundations of Hydrodynamic Lubrication

3/ Fundamentals of Journal Bearings

4/ Fundamentals of Thrust Bearings

5/ Stability of a Rotating Shaft – Oil Whip

6/ Foil Bearings

7/ Squeeze Film

8/ Heat Generation and Temperature Rise

9/ Turbulent Lubrication

http://ifile.it/glwsvrd

Mechanical Engineer’s Data Handbook

1/ Strength of materials

2/ Applied mechanics

3/ Thermodyanmics and heat transfer

4/ Fluid mechanics

5/ Manufacturing technology

6/ Engineering materials

7/ Engineering measurements

8/ General data

http://www.mediafire.com/?ro4895c1zrj619z

Pass: vinamain.com

Lubrication and Reliability Handbook

1/ Lubricants

2/ Lubrication of components

3/ Lubrication systems

4/ Machine operation

5/ Machine maintenance

6/ Component failures

7/ Component repair

8/ Reference data

http://ifile.it/ae6f3k1

Manual of Engineering Dwaring

1/ Drawing office management and organization

2/ Product development and computer aided design

3/ CAD organization and applications

4/ Principles of first and third angle orthographic projection

5/ Linework and lettering

6/ Three dimensional illustrations using isometric and oblique projection

7/ Drawing layouts and simplified methods

8/ Sections and sectional views

9/ Geometrical constructions and tangency

10/ Loci applications

11/ True lengths and auxiliary views

12/ Conic sections and interpenetration of solids

13/ Development of patterns from sheet materials

14/ Dimensioning principles

15/ Screw threads and conventional representations

16/ Nuts, bolts, screws and washers

17/ Keys and keyways

18/ Worked examples in machine drawing

19/ Limits and fits

20/ Geometrical tolerancing and datums

21/ Application of geometrical tolerances

22/ Maximum material and least material principles

23/ Positional tolerancing

24/ Cams and gears

25/ Springs

26/ Welding and welding symbols

27/ Engineering diagrams

28/ Bearings and applied technology

29/ Engineering adhesives

30/ Related standards

31/ Production drawings

32/ Drawing solutions

http://ifile.it/co8ghxw

Mechanical Engineering Systems

1/ Introduction: the basis of engineering

2/ Thermodynamics

3/ Fluid mechanics

4/ Dynamics

5/ Statics

http://ifile.it/g68o9e5

Gearbox and Differential

1/ Removal Refitting

2/ Bench Disassembly

3/ Gears

4/ Assembly

5/ Central Differential Unit: Distributor

6/ Front Differential Unit: Transmission

7/ Drive Shafts

8/ Tightening Torques

http://ifile.it/wcpt7eq

Lubrication and Lubricant Selection

1/ Basic Principles of Lubrication

2/ Choice of Lubricant Type

3/ Lubricating Oils

4/ Selection of Lubricating Oil

5/ Oil Supply Systems

6/ Oil Changing and Oil Conservation

7/ Greases and Anti-seizes

8/ Dry Bearings and Solid Lubrication

9/ Gas Bearings

10/ Sealing of Lubricants

11/ Lubricant Testing and Specifications

12/ Lubricant Monitoring

13/ Lubricant Handling and Storage

14/ Health and Safety

http://ifile.it/potrd06

A Textbook of Mechanical Engineering

http://ifile.it/cb17wqr

Mechanical Engineering’s Handbook

http://ifile.it/kl46p3i

Diesel Engine Fundamentals

http://ifile.it/ih5opjg

Mechanical Drawing Problems

http://ifile.it/xuqhbsm

Manual Gearbox Design

1/ Crown wheel and pinion

2/ Internal running gear

3/ Lubrication of gears

4/ Gear tooth failures

5/ Crown wheel and pinion designs

6/ Oerlikon cycloid spiral bevel gear calculations

7/ Gearbox design – rear-engined racing cars

http://ifile.it/fd5yiq4

What Went Wrong

1/ Preparation for Maintenance

2/ Modifications

3/ Accidents Caused by Human Error

4/ Labeling

5/ Storage Tanks

6/ Stacks

7/ Leaks

8/ Liquefied Flammable Gases

9/ Pipe and Vessel Failures

10/ Other Equipment

11/ Entry to Vessels

12/ Hazards of Common Materials

13/ Tank Trucks and Cars

14/ . Testing of Trips and Other Protective Systems

15/ Static Electricity

16/ Materials of Construction

17/ Operating Methods

18/ Reverse Flow and Other Unforeseen Deviations

19/ I Didn’t Know That

20/ Problems with Computer Control

21/ Inherently Safer Design

22/ Reactions-Planned and Unplanned

http://ifile.it/e8f3lgu

Tổng hợp

Hãy cảm ơn tác giả nếu tài liệu này hữu ích cho bạn

24 responses to “Tổng hợp sách kỹ thuật bảo trì cho dân cơ khí

  1. Cám ơn ban quản trị đã tập hợp nhiều tài liệu hay cho anh em cơ khí mình.

  2. Tài liệu hay, nhưng toàn tiếng anh ,tiếc quá.nếu là tiếng việt thì tốt quá

    • Vinamain có ý định dịch ra tiếng Việt các tài liệu này, nhưng đây là công việc lớn nên cần sự góp sức của nhiều bạn mới hoàn thành được. Mỗi bạn dịch một chương sau đó đăng trên Vinamain để nhận góp ý của cộng đồng và sửa chữa dần. Cuối cùng chúng ta sẽ có 1 cuốn sách hay và đầy ý nghĩa.

  3. bạn phải cố gắng dịch thôi.vừa dịch vừa học có phải hay ko !

  4. sao mấy cuốn trên trang ifile.it mình không dowload được.có ai download được thì chỉ mình với nhé.Thanks!

  5. àh, ví dụ như cuốn “Mechanical Engineer’s Data Handbook” đó. Mình click vào link download nhưng cửa sổ kế tiếp mở ra không phải là cửa sổ download file

  6. Theo như mình thấy thì hình như tất cả các sách trên trang ifile.it đều không down được thì phải (Link down bị lỗi).

  7. Rất cảm ơn Ban Quản trị đã đưa lên những tài liệu vô cùng quý giá cho dân kỹ thuật. Một lần nữa xin chân thành cảm ơn!

  8. Rất chân thành cảm ơn sự chia sẽ kiến thức của Ban quản trị vinamain. Nếu ai cũng có tinh thần chia sẽ kiến thức như các anh thì e tin rằng trình độ Việt nam sẽ theo kiệp thế giới trong tuơng lai gần. Thanks.

    • Cảm ơn comment của bạn lehoang. Mong muốn của BQT là làm gì có ích nhất cho cộng đồng mình. Qua đây Vinamain cũng kêu gọi sự tham gia xây dựng của các bạn bằng việc làm cụ thể như viết bài cho Vinamain và chia sẻ tài liệu hay kinh nghiệm trong công tác bảo dưỡng.

  9. thanks.
    những tài liệu này rất có ích cho ks cơ khí.

  10. Vinamain ơi, hình như có một số pass không đúng, nó không cho dơnload.
    Thân

  11. ban quản trị vui lòng đổi mấy cuốn ở link ifile sang mediafire được không ạ?

  12. Xin chao BQT Vinamain!
    Cam on BQT da suu tam va chia se rat nhieu tai lieu bo ich.
    BQT xem lai may duong link down tren ifile.it duoc khong sao khong chuyen no sang mediafire.
    Thanks!

  13. Chúng tôi sẽ sớm chuyển sang mediafire, các bạn nếu có sẵn link xin hãy gửi tặng chúng tôi.

  14. Cảm ơn bạn rất nhiều!

Gửi phản hồi

Mời bạn điền thông tin vào ô dưới đây hoặc kích vào một biểu tượng để đăng nhập:

WordPress.com Logo

Bạn đang bình luận bằng tài khoản WordPress.com Log Out / Thay đổi )

Twitter picture

Bạn đang bình luận bằng tài khoản Twitter Log Out / Thay đổi )

Facebook photo

Bạn đang bình luận bằng tài khoản Facebook Log Out / Thay đổi )

Google+ photo

Bạn đang bình luận bằng tài khoản Google+ Log Out / Thay đổi )

Connecting to %s